Original Laser Hair Removal Machine

1. Connect the handle piece to main machine. Check the handle piece if it is in good condition. Make sure the water tube is well connected. You will hear "click" when the water connector of hand piece are well locked. Otherwise, there will be water leakage or water jam, which may cause water pump broken or laser burning out.

1) Please confirm if your wall-plug is 200-240VAC. If it is 90-120VAC, please use voltage transformer.

2) Find a 10A 220-250V VAC plug wire (you may need an European Model for the wire), connect to the back panel.

3) Check if the emergency button(Red Mushroom) is pressed down. If pressed down, please rotate as per arrow direction to rebound.

4) Use the key to start the system and you will enter the welcome interface of the system as below:

5) Press the welcome interface, you will enter the second page as the right picture above. Till now, you are successfully enter the hair removal system. Please follow the "6. OPERATION" chapter to start the treatment.

6) For any emergency situation, please press the emergency button (Red Mushroom) to shut down the laser immediately.

7) After treatment, if you want to turn off the system, you can use the key to shut it down directly. And turn off the air switch at the back panel. You can remove the VAC plug if necessary.

Hot Tags: Original Laser Hair Removal Machine, China, manufacturers, factory, wholesale, price, cost, reviews, professional, for sale, for clinic